aussiemili.blogg.se - Battery status meter

#BATTERY STATUS METER PORTABLE#
#BATTERY STATUS METER SERIES#

Because half the strands are connected to the ground terminal or ground rod, reliance on soil moisture is reduced. To overcome this, Pos/Neg nets* are wired to allow the use of every other horizontal strand as an extension of the ground terminal. However, not all areas have the required moisture.ĭry soil increases resistance-a weaker, less effective pulse occurs that does not deter animals. × About Positive/Negative (Pos/Neg) Nets Is your area dry?Ĭonventional electrified fence systems rely on soil moisture to be effective.

A reading in the "EMPTY" range mean that the battery is dead and should be re-charged.

A reading in the "FULL" range means that the battery has a surface charge or that it is under charge.

A reading of 100% means the battery is fully charged.

For example, a 60% reading means that 60% of the battery's capacity is available.

The gauge displays the percent of charge remaining in the battery.

The meter will automatically light up when the switch is depressed.

After the battery has normalized, depress the switch and read the energy level.

For best reading, allow the battery to normalize for about 60 seconds after the load has been removed and then take the reading.

The surface charge may be removed by connecting the battery to a "load" such as a motor, lights, or other devices that the battery is connected to.

Similarly, if the battery has just been recharged (within 10 hours or so), disconnect the battery from the charger and remove the surface charge in order to obtain an accurate reading.

Batteries must be tested "at rest", otherwise the reading will not be accurate.

Before taking a reading of any battery, first shut off all loads (any device that is attached to the battery).

#BATTERY STATUS METER PORTABLE#

With turn off button. Wide voltage input, 12-84V, reverse protection, percentage of electricity, the voltage value of accurate display, the voltage accuracy of 1%Īpplicable battery specification: Lead-acid battery 12V, 24V, 36V, 48V, 60V, 72V, 84V Lithium-ion battery 3-15 seriesĪpplicable battery type: Ternary Lithium battery, Polymer lithium-ion battery, Lithium ion battery, Storage battery, Water battery, etc.Īpplication: Various instruments and meters portable device power bank medical device, electro mobile, self-balance car.

This battery indicator meter features wide input voltage, low power consumption. It can test the battery capacity of any lithium-ion battery. Widely and ideally used for ATV，quads， 4 wheelers， electric bike， golf cart and so on Made with ABS plastic LCD digital display with PVC waterproof screen protector and bright white back-light, low power consumption Switch the button to read the battery capacity or voltage. Multifunctional application – suitable for motorcycle, car, truck, vehicle, marine, boat, jet ski, golf cart, club car, forklift.What’s more, there’s a turn-off button for it. Digital display & low power consumption – the battery detector shows the results through the clear LCD display with PVC waterproof screen protector and bright white back-light.

2 in 1 Battery tester – you can change the switch to read the battery capacity or voltage only need to connected to the battery, no need extra power, plug and play in use.

#BATTERY STATUS METER SERIES#

Fits for various battery – suitable for 12V/24V/36V/48V/60V/72V/84V Ternary Lithium battery, Polymer lithium-ion battery, 3-15 series Lithium ion battery, Storage battery, Water battery, etc.

Universial battery indicator meter – wide voltage input range DC 12V-84V.